TulsaRecruiter
the smart solution for Tulsa jobs

Senior Process Engineer I

Company: Matrix PDM Engineering
Location: Tulsa
Posted on: May 19, 2019

Job Description:

JOB SUMMARY

THE SENIOR PROCESS ENGINEER I IS RESPONSIBLE FOR PERFORMING MASTERY LEVEL DESIGN AND ANALYSIS WORK AS DIRECTED TO SUPPORT VARIOUS FIELD AND FABRICATION OFFICES. THE SENIOR PROCESS ENGINEER I WILL BE PART OF A PROJECT TEAM FROM INCEPTION THROUGH CONSTRUCTION COMPLETION.

ESSENTIAL FUNCTIONS

* Actively supports the Company's commitment to safety and its "Core Values."

* Represents the Company at all times with high moral standards while adhering to the Company's "Code of Business Conduct and Ethics."

* Independently applies extensive and diversified knowledge of principles and practices in broad areas of assignments and related fields.

* Uses advanced techniques in the modification or extension of theories and practices of sciences and disciplines to complete assignments.

* Works on a major project or several projects of moderate scope with complex features.

* Reviews complete project documents for conformity and quality assurance.

* Develops new techniques and/or improved processes, materials, or products.

* Assists upper level management or staff as a technical specialist or advisor.

* Coordinates work with all staff necessary to complete assignments.

* Reviews and approves scopes, budgets, and schedules for assignments.

* Prepares proposals to provide professional services or obtain funding for engineering projects or programs.

* Receives supervision and guidance related to overall objectives, critical issues, new concepts, and policy matters.

* Receives direction on unusual conditions and developments.

* Possesses advanced oral and written communication skills.

* Represents the organization in communications and conferences pertaining to broad aspects of engineering assignments.

* Performs other related duties, as directed.

QUALIFICATIONS

* BS in Mechanical or Chemical Engineering required. Professional Engineer (PE) preferred

* 6+ years related engineering experience

* Strong understanding of systems and mechanical and/or chemical engineering practices and processes

* Demonstrated experience in the design of process piping, tanking, blending, and chemical processes

* Demonstrated experience developing process parameters including mass flow, heat transfer, material balance capacities and rates

* Demonstrated experience with one of the following analysis tools: HYSYS, ProMax or other simulation software

* Lead Process Hazard Analysis (PHA) Sessions and participate in HAZOP studies

* Demonstrated experience developing the system design including PFD, PID, Layouts and Specifications

* Demonstrated experience developing not to exceed horse powers and basic process data with preliminary information

* Demonstrated experience identifying key process and system data

* Demonstrated experience selecting equipment such as process units and instruments

* Demonstrated experience in developing industry specific calculations for systems such as chemical balance, pipe flow rates, compression, maximum intended inventory, over pressure protection

* Demonstrated experience with multiple materials within the industry of expertise

* Demonstrated experience interfacing with the mechanical, structural and electrical engineers

* Demonstrated experience with the management of key design basis documents

* General understanding of ANSI and NFPA

* Demonstrated experience performing construction cost estimates for industrial installations including quantity development

* Experience developing sizing information for Process Equipment (compressors, pumps, heat exchangers, distillation columns, separators, reactors, etc.) and providing information in the form of equipment data sheets

* Experience preparing material selection designation (diagram) for plant requirements

* Demonstrated experience with Battery Limit Lists including the line lists, equipment list, and initial instrument list

* Experience with logic diagrams and cause & effect charts for the facility

* Experience with flare system analysis and final reporting, including the sizing of the relief valve inlet and outlet line sizing

* Demonstrated experience in one of the following industries; liquid material handling, LNG, gas treating, oil and gas, or power plants. Strong skill set in understanding PFD's and P&ID's; 3D and 2D routing and modeling; development of isometric drawings and selection for valves is required

* Occasional overtime and travel may be required.

Equal Opportunity Employer/Protected Veterans/Individuals with DisabilitiesThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor s legal duty to furnish information.

Keywords: Matrix PDM Engineering, Tulsa , Senior Process Engineer I, Engineering , Tulsa, Oklahoma

Click here to apply!

Didn't find what you're looking for? Search again!

I'm looking for
in category
within


Other Engineering Jobs


Field Equipment Technician
Description: Field Equipment Service Technician Must possess an Unlimited Journeyman License to be considered. This position ensures that Reddy Ice field service equipment is well-maintained
Company: ReddyIce
Location: Tulsa
Posted on: 05/21/2019

Diesel Technician/Mechanic III - Entry Level
Description: Be apart of a skilled service team br br What's the Job br br Ready to accelerate your career while helping our customers move forward As a Technician III at Penske, you'll do exactly that. (more...)
Company: PENSKE TRUCK LEASING
Location: Tulsa
Posted on: 05/23/2019

Mechanic
Description: Setting the Standard of Excellence.When you join Employer, you stake your claim as one of the elite. Groendyke has set the standard of excellence in the tank truck industry since 1932. In 2017,
Company: Groendyke Transport
Location: Tulsa
Posted on: 05/19/2019


ENGINEERING DIRECTOR
Description: ENGINEERING DIRECTOR TULSA, Oklahoma, USA New Hot Engineering KOCH CHEM TECH Membrane/John Zink/Koch-Glitsch/KHT/KSPS/OPD/Knight 061016 Requisition Share this Job Who are we Watch to find out John (more...)
Company: Koch Industries
Location: Tulsa
Posted on: 05/21/2019

12Y Geospatial Engineer
Description: You can play an important part in disaster relief missions as a Geospatial Engineer for the Army National Guard. In this role, you will extract and supply geographic data that supports military operations (more...)
Company: Army National Guard
Location: Fayetteville
Posted on: 05/20/2019

Senior Process Engineer I
Description: JOB SUMMARY br br THE SENIOR PROCESS ENGINEER I IS RESPONSIBLE FOR PERFORMING MASTERY LEVEL DESIGN AND ANALYSIS WORK AS DIRECTED TO SUPPORT VARIOUS FIELD AND FABRICATION OFFICES. THE SENIOR PROCESS (more...)
Company: Matrix PDM Engineering
Location: Tulsa
Posted on: 05/19/2019

URGENT: Mechanic Wanted - Quail Springs Car Needs Cabin Air Filter, Oil Change, A/C Check Up
Description: I am needing: br - inspect AC system tell me why car A/C system isn't cooling depending on the problem, I may or may not repair it... but
Company: MeetA USD
Location: Edmond
Posted on: 05/19/2019

Fleet Mechanic
Description: NOW HIRING Mechanics Apprentices Tulsa Transit is looking for qualified candidates to fill several open positions. Offering great pay and outstanding benefits The Vision
Company: Tulsa Transit
Location: Tulsa
Posted on: 05/19/2019

Aircraft Mechanics
Description: Experienced Mechanics needed. Lead Positions Available.
Company: Air Flow Solutions
Location: Tulsa
Posted on: 05/18/2019

13B Cannon Crewmember - Weapons Systems Technician
Description: As a Cannon Crewmember in the Army National Guard, you join a team that ensures the U.S. maintains its battlefield superiority. You------,--------ll deliver decisive blows to the enemy using howitzers (more...)
Company: Army National Guard
Location: Rogers
Posted on: 05/19/2019

Log In or Create An Account

Get the latest Oklahoma jobs by following @recnetOK on Twitter!

Tulsa RSS job feeds